Cases
Check out our cases.
HEAT EXCHANGER - TALLARA REFINERY OF PETROPERU S/A
- VOLTAGE ANALYSIS (ASME VIII, DIVISION2) AND EARTHQUAKE (PERUVIAN STANDARD)
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MEESA (AUSTRIA) & HALDOR TOPSOE (AUSTRIA)
- ANSYS
- APRIL/2019
SCRUBBER
- STRESS ANALYSIS FOR THE THERMAL TRANSIENT IN THE COATING
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MEESA (AUSTRIA)
- ANSYS
- APRIL/2019
LARGE DIAMETER PIPE - GALVANI (SERRA DO SALITRE / MG)
- TENSION ANALYSIS
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MJS (OSASCO / SP)
- ANSYS
- OCTOBER/2020
METHANOL PLANT OXYGEN REACTOR COVER FROM ARIAN GmbH
- PROJECT VALIDATION BY VOLTAGE ANALYSIS
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MEESA (AUSTRIA)
- ANSYS
- MAY/2019
ANALYSIS OF FIXING SCREWS OF THE TRAY OF A WATER FLOTER FOR ETE – GUAMARÉ
- VOLTAGE ANALYSIS FOR EVALUATION OF EQUIPMENT INTEGRITY AFTER ROUTINE MAINTENANCE
- INTEGRITY VALIDATION AND CONFIRMATION OF THE REMAINING USEFUL LIFE (VUR)
- VEOLIA (SÃO PAULO/SP)
- ANSYS
- DECEMBER/2019
DIGESTOR FOR PAPER PRODUCTION
- CALCULATION ACCORDING TO ASME VIII, DIVISION 1, AND EARTHQUAKE ACCORDING TO CHILEAN STANDARD
- REDUCTION OF INITIAL WEIGHT BY 5%
- TEQUALY / ARAUCO (CHILE)
- PVELITE
- NOVEMBER/ 2017
HIGH PRESSURE HEAT EXCHANGER - FPSO MV30 - PETROBRAS
- STRESS ANALYSIS FOR PROJECT VALIDATION
- ANTICIPATION OF THE FINAL ISSUE OF THE PROJECT DOCUMENTATION IN X WEEKS
- KELVION (CLEAN FIELD/SP)
- ANSYS
- MARCH/2019
- STRESS ANALYSIS FOR VALIDATION OF THE ENGINEERING PROJECT
- ANTICIPATION OF PROJECT DOCUMENTATION IN X WEEKS
- CRISTÓFOLI (PARANÁ/BR)
- ANSYS
- JUNE/2020
SUPER HEATER FROM INTERNATIONAL PETROCHEMICAL Co
- TENSION ANALYSIS OF TUBULONS AND SERPENTINE, INCLUDING LIFTING AND MARITIME TRANSPORTATION
- REVIEW OF THE LIFT AND TRANSPORTATION PROJECT, GUARANTEING THE EXPECTED STRUCTURAL RELIABILITY
- MEESA (AUSTRIA) & INNOWELD METALVERARBEITUNG GmbH (AUSTRIA)
- ANSYS
- NOVEMBER/2020
PRESSURE VESSEL
- CALCULATION ACCORDING TO GERMAN STANDARD AD-2000
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MCE (GERMANY)
- MANUAL CALCULATION
- MAY/2019
EVAPORATOR DUCTS, EFFECTS 1 TO 6 - LIQUOR EVAPORATION SYSTEM AND ASH TREATMENT (AREA 601) OF THE WEST ROCK PLANT IN THREE BARS
- STRESS SIZING AND ANALYSIS
- REDUCTION OF INITIAL WEIGHT BY 5%
- TEQUALY (CURITIBA / PR)
- ANSYS
- NOVEMBER/2019
CHEMICAL REACTOR
- EQUIPMENT SIZING AND VALIDATION ACCORDING TO ASME VIII, DIVISION 1
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MCE (GERMANY)
- PVELITE
- MAY/2019
4th EFFECT OF THE EVAPORATION SYSTEM
- STRESS ANALYSIS FOR VERIFICATION OF STRUCTURE INTEGRITY IN REGIONS WITH EXCESSIVE CORROSION
- VALIDATION OF STRUCTURAL INTEGRITY (FITNESS FOR SERVICE), WITH SAVINGS IN THE ORDER OF R$ XXX MILLION
- TEQUALY (CURITIBA / PR)
- ANSYS
- MAY/2021
OUTLET PIPE OF A REFORM OVEN
- SYSTEM DETAIL
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MEESA (AUSTRIA) & INNOWELD METALVERARBEITUNG GmbH (AUSTRIA)
- AUTODESK AUTOCAD
- NOVEMBER/2020
CHIMNEY FAN (USIMEC)
- TENSION AND FATIGUE ANALYSIS
- REMAINING USEFUL LIFE VALIDATION (VUR), WITH R$ XXX MILLION SAVINGS
- LCI FANS
- TEQUALY (CURITIBA / PR)
- ANSYS
- JUNE/2019
ROTATING COOLER OF CMOC INTERNATIONAL NIOBIUM CALCINATOR OVEN
- FATIGUE ANALYSIS
- DETERMINATION OF THE REMAINING USEFUL LIFE (VUR)
- MJS (OSASCO / SP)
- ANSYS
- JUNE/2020
TURBINE AND STEAM CONDENSERS OF THE UTE – SANTA CRUZ
- HYDRAULIC TRANSIENT ANALYSIS FOR THE COOLING WATER SUPPLY AND CAPTURE SYSTEM
- ADEQUACY OF GEOMETRY TO COMPLY WITH THE REQUIRED STANDARDS
- PROGEN (SÃO PAULO / SP)
- PIPENET
- OCTOBER/2019
CHIMNEY (KLABIN)
- CALCULATION ACCORDING TO ASME STS
- 5% REDUCTION FROM THE INITIAL WEIGHT
- TEQUALY (CURITIBA / PR)
- PVELITE
- MAY/2019
MAIN SADDLES OF THE PIPING OF THE COOLING WATER CAPTURE AND SUPPLY SYSTEM OF THE TURBINE AND STEAM CONDENSERS OF THE UTE – SANTA CRUZ
- TENSION ANALYSIS
- ADEQUACY OF GEOMETRY TO COMPLY WITH THE REQUIRED STANDARDS
- PROGEN (SÃO PAULO / SP)
- ANSYS
- SEPTEMBER/2020
ECONOMIZER DUCT SYSTEM - OIL BOILER OF THE BIOLOGICAL SLUDGE DRYING SYSTEM (CENIBRA)
- TENSION ANALYSIS
- 5% REDUCTION FROM THE INITIAL WEIGHT
- TEQUALY (CURITIBA / PR)
- ANSYS
- SEPTEMBER/2019
DRAG SEPARATOR (INTERNATIONAL PAPER)
- TENSION ANALYSIS
- ADJUSTMENT OF THE STRUCTURE IN THE CONCEPTUAL PROJECT PHASE, WITH SAVINGS OF R$ XXX MILLION
- TEQUALY (CURITIBA / PR)
- ANSYS
- MAY/2019
ECONOMIZER DUCT SYSTEM - OIL BOILER OF THE BIOLOGICAL SLUDGE DRYING SYSTEM (CENIBRA)
- TENSION ANALYSIS
- 5% REDUCTION FROM THE INITIAL WEIGHT
- TEQUALY (CURITIBA / PR)
- ANSYS
- SEPTEMBER/2019
SLUDGE SILO (CENIBRA)
- STRUCTURAL SIZING
- 5% REDUCTION FROM THE INITIAL WEIGHT
- TEQUALY (CURITIBA / PR)
- PVELITE
- JUNE/2019
ACCIDENT API-650 TANK
- EVALUATION OF STRUCTURAL INTEGRITY (FITNESS-FOR-SERVICE) BY STANDARDS AND STRESS ANALYSIS AND FURTHER PROPOSAL OF SOLUTION FOR RETURN IN OPERATION
- EQUIPMENT RECOVERED AND OPERATING AT 98% OF THE RATED LOAD
- TEQUALY (CURITIBA / PR)
- ANSYS (SURVEY OF GEOMETRY BY POINT CLOUD)
- AUGUST/2020
GNCD CONDENSER SUPPLIED FOR THE OIL BOILER OF CENIBRA'S BIOLOGICAL SLUDGE DRYING SYSTEM
- PROJECT SIZING
- 5% REDUCTION FROM THE INITIAL WEIGHT
- TEQUALY (CURITIBA / PR)
- ANSYS
- MAY/2019
BLOW-TANK - REINFORCED ROOF (INTERNATIONAL PAPER)
- TENSION ANALYSIS
- 5% REDUCTION FROM THE INITIAL WEIGHT
- TEQUALY (CURITIBA / PR)
- ANSYS
- OCTOBER/2018
QUENCHER (KLABIN)
- CALCULATION ACCORDING TO ASME VIII, DIVISION 1
- 5% REDUCTION FROM THE INITIAL WEIGHT
- TEQUALY (CURITIBA / PR)
- PVELITE
- MAY/2019
RECLAIMER (VERACEL)
- TENSION AND FATIGUE ANALYSIS
- PROPOSED NEW GEOMETRY FOR THE COUNTERWEIGHT AND RACK SYSTEM, RESULTING IN XXX MILLION R$ SAVINGS
- TEQUALY (CURITIBA / PR)
- ANSYS
- MAY/2021
WESTROCK DIGESTOR SYSTEM
- HYDRAULIC TRANSIENT ANALYSIS
- PROJECT REVIEW IN THE BASIC ENGINEERING PHASE, PROVIDING SAVINGS IN THE ORDER OF R$ XXX MILLION
- TEQUALY (CURITIBA / PR)
- PIPENET
- JANUARY/2020
EQUIPMENT: COMPLETE GAS BURNING SYSTEM FOR BRACELL (LENCÓIS PAULISTAS /SP) COMPOSED OF BURNERS, QUENCHERS AND WASHER
- TENSION ANALYSIS
- REDUCTION OF 5% IN THE INITIAL WEIGHT OF REQUIRED STANDARDS
- TEQUALY (CURITIBA / PR)
- ANSYS
- MARCH/2021
ULTRAFERTILE ROTARY DRYER
- FATIGUE ANALYSIS
- DETERMINATION OF THE REMAINING USEFUL LIFE (VUR)
- MJS (OSASCO / SP)
- ANSYS
- MAY/2021
THYSSEN-KRUPP NITROGEN VESSEL
- CALCULATION ACCORDING TO ASME VIII, DIVISION 1
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MEESA (AUSTRIA)
- PVELITE
- APRIL/2019
DETAILS OF PILES FOR INSTALLATION IN PORTS OF THE NETHERLANDS
- DETAILING AND DIMENSIONING
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MCE (GERMANY)
- AUTODESK INVENTOR
- MARCH/2020
SAND FILTER
- CALCULATION ACCORDING TO ASME VIII, DIVISION 1
- 5% REDUCTION FROM THE INITIAL WEIGHT
- MCE / PRIMETAL (GERMANY) - INSTALLATION AT US STEEL (PENNSYLVANIA/USA)
- CODECALC
- AUGUST/2020
AIR-COOLER STRUCTURE - FPSO MV32 - MODEC
- STRESS ANALYSIS FOR VALIDATION OF THE STRUCTURE IN OPERATING AND LIFTING CONDITIONS
- 5% REDUCTION FROM THE INITIAL WEIGHT
- KELVION (CLEAN FIELD/SP)
- SAP-2000
- MAY/2020
ANALYSIS OF FAN TIES FOR INSTALLATION IN TUNNELS
- PROPOSITION AND VALIDATION BY VOLTAGE ANALYSIS OF A NEW CONFIGURATION OF THE SUPPORT SYSTEM
- ANTICIPATION OF THE FINAL PROJECT IN X WEEKS
- FAN-TR (ITU/SP)
- ANSYS
- DECEMBER/2019